Physicochemical Characterization of Biofield Energy Treated Hi VegTM Acid Hydrolysate

Journal: International Journal of Nutrition and Food Science PDF

Published: 21-Dec-15 Volume: 5 Issue: 1

DOI:10.11648/j.ijnfs.20160501.11 ISSN: 2327-2716 (Print) 2327-2716 (Online)

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak, Ragini Singh, Snehasis Jana

Abstract

The hydrolysed vegetable proteins are acidic or enzymatic hydrolytic product of proteins derived from various sources such as milk, meat or vegetables. The current study was designed to evaluate the impact of biofield energy treatment on the various physicochemical and spectra properties of Hi VegTM acid hydrolysate i.e. a hydrolysed vegetable protein. The Hi VegTM acid hydrolysate sample was divided into two parts that served as control and treated sample. The treated sample was subjected to the biofield energy treatment and its properties were analysed using particle size analyser, X-ray diffraction (XRD), surface area analyser, UV-visible and infrared (FT-IR) spectroscopy, and thermogravimetric analysis. The results of various parameters were compared with the control (untreated) part. The XRD data showed the decrease in crystallite size of treated sample from 110.27 nm (control) to 79.26 nm. The particle size was also reduced in treated sample as 162.13 ?m as compared to the control sample (168.27 ?m). Moreover, the surface area analysis revealed the 63.79% increase in the surface area of the biofield treated sample as compared to the control. The UV-Vis spectra of both samples i.e. control and treated showed the absorbance at same wavelength. However, the FT-IR spectroscopy revealed the shifting in peaks corresponding to N-H, C-H, C=O, C-N, and C-S functional groups in the treated sample with respect to the control. The thermal analysis also revealed the alteration in degradation pattern along with increase in onset temperature of degradation and maximum degradation temperature in the treated sample as compared to the control. The overall data showed the impact of biofield energy treatment on the physicochemical and spectroscopic properties of the treated sample of Hi VegTM acid hydrolysate. The biofield treated sample might show the improved solubility, wettability and thermal stability profile as compared to the control sample.

Characterization of Atomic and Physical Properties of Biofield Energy Treated Manganese Sulfide Powder

Journal: American Journal Of Physics And Applications PDF

Published: 21-Dec-15 Volume: 3 Issue: 6

DOI:10.11648/j.ajpa.20150306.15 ISSN: 2330-4286 (Print) 2330-4308 (Online)

Authors: Mahendra Kumar Trivedi, Rama Mohan Tallapragada, Alice Branton, Dahryn Trivedi, Gopal Nayak, Omprakash Latiyal, Snehasis Jana

Abstract

Manganese sulfide (MnS) is known for its wide applications in solar cell, opto-electronic devices, and photochemical industries. The present study was designed to evaluate the effect of biofield energy treatment on the atomic and physical properties of MnS. The MnS powder sample was equally divided into two parts, referred as to be control and to be treated. The treated part was subjected to Mr. Trivedi’s biofield energy treatment. After that, both control and treated samples were investigated using X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and electron spin resonance (ESR) spectroscopy. The XRD data revealed that the biofield energy treatment has altered the lattice parameter, unit cell volume, density, and molecular weight of the treated MnS sample as compared to the control. The crystallite size on various planes was significantly changed from -50.0% to 33.3% in treated sample as compared to the control. The FT-IR analysis exhibited that the absorption band attributed to Mn-S stretching vibration was reduced from (634 cm-1) to 613 cm-1 in treated MnS as compared to the control. Besides, the ESR study revealed that g-factor was reduced by 3.3% in the treated sample as compared to the control. Therefore, the biofield energy treated MnS could be applied for the use in solar cell and semiconductor applications.

Mass Spectrometry Analysis of Isotopic Abundance of 13C, 2H, or 15N in Biofield Energy Treated Aminopyridine Derivatives

Journal: American Journal of Physical Chemistry PDF

Published: 22-Dec-15 Volume: 4 Issue: 6

DOI:10.11648/j.ajpc.20150406.14 ISSN: 2327-2430 (Print) 2327-2449 (Online)

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak, Gunin Saikia, Snehasis Jana

Abstract

2-Aminopyridine (2-AP) and 2,6-diaminopyridine (2,6-DAP) are two derivatives of aminopyridines that act as an important organic intermediates, mostly used in medicines, dyes and organic sensors. The aim of the study was to evaluate the impact of biofield energy treatment on isotopic abundance ratios of 2H/1H, 13C/12C, or 15N/14N, in aminopyridine derivatives using gas chromatography-mass spectrometry (GC-MS). The 2-AP and 2,6-DAP samples were divided into two parts: control and treated. The control sample remained as untreated, while the treated sample was further divided into four groups as T1, T2, T3, and T4. The treated group was subjected to Mr. Trivedi’s biofield energy treatment. The GC-MS spectra of 2-AP and 2,6-DAP showed five and six m/z peaks respectively due to the molecular ion peak and fragmented peaks of aminopyridine derivatives. The isotopic abundance ratio of 2H/1H, 13C/12C, or 15N/14N were calculated for both the derivatives and significant alteration was found in the treated samples as compared to the respective control. The isotopic abundance ratio of 2H/1H, 13C/12C, or 15N/14N in treated samples of 2-AP was decreased by 55.83% in T1 and significantly increased by 202.26% in T4. However, in case of 2,6-DAP, the isotopic abundance ratio of 2H/1H, 13C/12C, and 15N/14N, in the treated sample showed a significant increase (up to 370.54% in T3) with respect to the control. GC-MS data suggested that the biofield energy treatment on aminopyridine derivatives had significantly altered the isotopic abundance of 2H, 13C, or 15N in the treated 2-AP and 2,6-DAP as compared to the control.

Physicochemical Characterization of Biofield Energy Treated Calcium Carbonate Powder

Journal: American Journal of Health Research PDF

Published: 18-Dec-15 Volume: 3 Issue: 6

DOI:10.11648/j.ajhr.20150306.19 ISSN: 2330-8788 (Print) 2330-8796 (Online)

Authors: Mahendra Kumar Trivedi, Rama Mohan Tallapragada, Alice Branton, Dahryn Trivedi, Gopal Nayak, Omprakash Latiyal, Rakesh Kumar Mishra, Snehasis Jana

Abstract

Calcium carbonate (CaCO3) is widely used in pharmaceutical industries and as a supplement in probiotics. The present study was designed to evaluate the effect of biofield energy treatment on the physicochemical properties of the CaCO3. The CaCO3 powder was divided into two parts and referred as control and treated. The control part was remained untreated, whereas treated part was subjected to Trivedi’s biofield treatment. The control and biofield treated samples were characterized using X-ray diffraction (XRD), particle size analyzer, surface area analyzer, thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FT-IR). The XRD showed that the crystallite size of treated CaCO3 was increased up to 100% as compared to the control. In addition, the lattice strain was reduced in treated sample as compared to the control. The particle size analysis result showed that the average particle size was significantly changed after treatment that led to considerably enhance the specific surface area of treated CaCO3 powder by 95% as compared to the control. The FT-IR spectroscopic analysis of the treated calcium carbonate showed shifting of wavenumber attributed to symmetric stretching vibrations of carbonate ion to higher wavenumber as compared to the control. The TGA analysis showed reduction in weight loss and increase in char yield which may be due to the increase in thermal stability of the treated sample. Therefore, the biofield treatment had significantly altered the physicochemical properties of the calcium carbonate. Hence, it is assumed that treated calcium carbonate could be used as a potential supplement of probiotics for food applications.

Physicochemical and Spectral Characterization of Biofield Energy Treated 4-Methylbenzoic Acid

Journal: American Journal of Chemical Engineering PDF

Published: 21-Dec-15 Volume: 3 Issue: 6

DOI:10.11648/j.ajche.20150306.14 ISSN: 2330-8605 (Print) 2330-8613 (Online)

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak, Ragini Singh, Snehasis Jana,

Abstract

The present study was aimed to analyse the impact of biofield energy treatment on the physicochemical and spectral properties of 4-MBA. The compound was divided into two parts which are referred as the control and treated sample. The treated sample was subjected to Mr. Trivedi’s biofield energy treatment and analysed with respect to the control sample. The various analytical techniques used were X-ray diffraction (XRD), surface area analysis, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR), and UV-visible spectroscopy. The XRD data revealed the alteration in the relative intensities of the peaks as well as reduction in the average crystallite size (24.62%) of the treated sample as compared to the control. The surface area analysis revealed a slight reduction in the surface area of the treated sample. The differential scanning calorimetry analysis reported a slight increase in the melting point while significant reduction in the latent heat of fusion of the treated sample (39.96 J/g) as compared to the control (133.72 J/g). Moreover, the TGA thermogram of the treated sample revealed the reduction in the onset temperature and maximum thermal degradation temperature as compared to the control. However, the FT-IR and UV-Vis spectra of treated sample did not show any significant alteration as compared to their respective control spectra. The overall data indicated the improved physical and thermal properties of the biofield treated 4-MBA sample that might be helpful in increasing the reaction kinetics, where it will be used as a reaction intermediate.

Effect of Biofield Energy Treatment on Physical and Structural Properties of Calcium Carbide and Praseodymium Oxide

Journal: International Journal of Materials Science and Applications PDF

Published: 21-Dec-15 Volume: 4 Issue: 6

DOI:10.11648/j.ijmsa.20150406.14 ISSN: 2327-2635 (Print) 2327-2643 (Online)

Authors: Mahendra Kumar Trivedi, Rama Mohan Tallapragada, Alice Branton, Dahryn Trivedi, Gopal Nayak, Omprakash Latiyal, Snehasis Jana

Abstract

Calcium carbide (CaC2) is known for its wide applications in the production of acetylene and calcium cyanamide, whereas praseodymium Oxide (Pr6O11) is used in sensors and high-temperature pigments. The present study was designed to evaluate the effect of biofield energy treatment on the physical and structural properties of CaC2 and Pr6O11 powder. The powder samples of both compounds were equally divided into two parts, referred as control and treated. The treated part of both compounds was subjected to Mr. Trivedi’s biofield energy treatment. After that, both control and treated samples were investigated using X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) spectroscopy. The XRD data revealed that the biofield energy treatment has increased the lattice parameter of unit cell by 3.35% in the treated CaC2 sample as compared to the control. The density of treated CaC2 sample was reduced upto 4.49% and molecular weight was increased upto 4.70% as compared to the control. The crystallite size of CaC2 was reduced from 98.19 nm (control) to 52.93 nm in the treated CaC2 sample as compared to the control. The FT-IR analysis exhibited that the absorption band attributed to C=C stretching vibration was shifted to higher wavenumber as compared to the control. Thus, above data suggested that biofield energy treatment has considerable impact on the physical and structural properties of CaC2. Besides, in Pr6O11, the XRD did not show any significant change in lattice parameter, density and molecular weight. However, the FT-IR spectra revealed that the absorption band attributing to Pr-O stretching vibration was shifted from 593 cm-1 (control) to higher wavenumber 598 cm-1 in the treated Pr6O11 sample. Therefore, the biofield energy treatment could be applied to modify the CaC2 and Pr6O11 powder for the use in chemical industries.

Determination of Isotopic Abundance of 2H, 13C, 18O, and 37Cl in Biofield Energy Treated Dichlorophenol Isomers

Journal: Science Journal of Analytical Chemistry PDF

Published: 21-Dec-15 Volume: 4 Issue: 1

DOI:10.11648/j.sjac.20160401.11 ISSN: 2376-8045 (Print) 2376-8053 (Online)

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak, Gunin Saikia, Snehasis Jana

Abstract

2,4-Dichlorophenol (2,4-DCP) and 2,6-dichlorophenol (2,6-DCP) are two isomers of dichlorophenols, have been used as preservative agents for wood, paints, vegetable fibers and as intermediates in the production of pharmaceuticals and dyes. The aim of the study was to evaluate the impact of biofield energy treatment on the isotopic abundance ratios of 2H/1H or 13C/12C, and 18O/16O or 37Cl/35Cl, in dichlorophenol isomers using gas chromatography-mass spectrometry (GC-MS). The 2,4-DCP and 2,6-DCP samples were divided into two parts: control and treated. The control sample remained as untreated, while the treated sample was further divided into four groups as T1, T2, T3, and T4. The treated group was subjected to Mr. Trivedi’s biofield energy treatment. The GC-MS spectra of 2,4-DCP and 2,6-DCP showed three to six m/zpeaks at 162, 126, 98, 73, 63, 37 etc. due to the molecular ion peak and fragmented peaks. The isotopic abundance ratios (percentage) in both the isomers were increased significantly after biofield treatment as compared to the control. The isotopic abundance ratio of (PM+1)/PM and (PM+2)/PM after biofield energy treatment were increased by 54.38% and 40.57% in 2,4-DCP and 126.11% and 18.65% in 2,6-DCP, respectively which may affect the bond energy, reactivity and finally stability to the product.

Physicochemical and Atomic Characterization of Silver Powder after Biofield Treatment

Journal: Bioengineering & Biomedical Science PDF

Published: 28-Sep-15 Volume: 5 Issue: 3

DOI:10.4172/2155-9538.1000165 ISSN: 2155-9538

Authors: Mahendra Kumar Trivedi, Rama Mohan Tallapragada, Alice Branton, Dahryn Trivedi, Gopal Nayak , Omprakash Latiyal and Snehasis Jana *

Abstract

Silver is widely utilized as antimicrobial agent and wound dressing, where its shape, size, surface area, and surface charge play an important role. The aim of present study was to evaluate the impact of biofield treatment on physicochemical and atomic properties of silver powder. The silver powder was divided into two groups, coded as control and treatment. The treatment group received Mr. Trivedi’s biofield treatment. Subsequently, control and treated samples were characterized using particle size analyzer, X-ray diffraction (XRD) and surface area analyser. Particle size data exhibited that particle sizes d10, d50, d90, and d99 (Size, below which 10, 50, 90, and 99% particle are present, respectively) of treated silver powder were substantially reduced up to 95.8, 89.9, 83.2, and 79.0% on day 84 as compared to control. XRD results showed that lattice parameter, unit cell volume, and atomic weight were reduced, whereas density and nuclear charge per unit volume were found to be increased as compared to control. In addition, the crystallite size was significantly reduced up to 70% after biofield treatment on day 105 as compared to control. Furthermore, the surface area of treated silver powder was substantially enhanced by 49.41% on day 68 as compared to control. These findings suggest that biofield treatment has significantly altered the atomic and physicochemical properties which could make silver more useful in antimicrobial applications.

Characterization of Thermal and Physical properties of Biofield Treated Acrylamide and 2-Chloroacetamide

Journal: Organic Chemistry Current Research PDF

Published: 29-Jul-15 Volume: 4 Issue: 3

DOI:10.4172/2161-0401.1000143 ISSN: 2161-0401

Authors: Mahendra KT, Shrikant P, Rakesh KM, and Snehasis J*

Abstract

Acrylamide (AM) and 2-chloroacetamide (CA) are widely used in diverse applications such as biomedical, drug delivery, waste water treatment, and heavy metal ion removal. The objective of this study was to evaluate the influence of biofield treatment on physical and thermal properties of amide group containing compounds (AM and CA). The study was performed in two groups (control and treated). The control group remained as untreated, and biofield treatment was given to treated group. The control and treated compounds were characterized by X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and surface area analysis. XRD of treated AM showed decrease in intensity of peaks as compared to control sample. However, the treated AM showed increase in volume of unit cell (0.16%) and molecular weight (0.16%) as compared to control. The crystallite size was decreased by 33.34% in treated AM as compared to control Whereas, the XRD diffractogram of treated CA showed increase in intensity of crystalline peaks as compared to control. The percentage volume of unit cell (-1.92%) and molecular weight (-1.92%) of treated CA were decreased as compared to control. However, significant increase in crystallite size (129.79%) was observed in treated CA as compared to control. DSC of treated AM showed increase in melting temperature as compared to control sample. Similarly, the treated CA also showed increase in melting temperature with respect to control. Latent heat of fusion (?H) was significantly changed in treated AM and CA as compared to control samples. TGA showed increase in thermal stability of treated AM and CA which was evidenced by increase in thermal decomposition temperature (Tmax) as compared to control. Surface area analysis of treated AM showed increase (31.6%) in surface area as compared to control. However, a decrease (30.9%) in surface area was noticed in treated CA as compared to control. Study results suggest that biofield treatment has significant impact on the physical and thermal properties of AM and CA.

Biofield Treatment: An Effective Strategy for Modulating the Physical and Thermal Properties of O-Nitrophenol, M-Nitrophenol and P-Tertiary Butyl Phenol

Journal: Bioanalysis & Biomedicine PDF

Published: 11-Sep-15 Volume: 7 Issue: 5

DOI:10.4172/1948-593X.1000137 ISSN: 1948-593X

Authors: Mahendra Kumar Trivedi, Rama Mohan Tallapragada, Alice Branton, Dahryn Trivedi, Gopal Nayak, Rakesh K Mishra and Snehasis Jana*

Abstract

Phenolic compounds are commonly used for diverse applications such as in pharmaceuticals, chemicals, rubber, dyes and pigments. The objective of present research was to study the impact of Mr. Trivedi’s biofield treatment on physical and thermal properties of phenol derivatives such as o-nitrophenol (ONP), m-nitrophenol (MNP) and p-tertiary butyl phenol (TBP). The study was performed in two groups (control and treated). The control and treated compounds were characterized using X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and surface area analysis. XRD analysis showed increase in crystallite size by 16.05% in treated ONP as compared to control. However, the treated MNP showed decrease in crystallite size by 16.17% as compared to control. The treated TBP showed increase in crystallite size by 5.20% as compared to control. DSC of treated MNP exhibited increase in melting temperature with respect to control, which may be correlated to higher thermal stability of treated sample. However, the treated TBP exhibited no significant change in melting temperature with respect to control. TGA analysis of treated ONP and TBP showed an increase in maximum thermal decomposition temperature (Tmax) as compared to control. However, the treated MNP showed slight decrease in Tmax in comparison with control sample. Surface area analysis of treated ONP showed decrease in surface area by 65.5%. However, surface area was increased by 40.7% in treated MNP as compared to control. These results suggest that biofield treatment has significant effect on physical and thermal properties of ONP, MNP and TBP.

Characterization of Physicochemical and Thermal Properties of Biofield Treated Ethyl Cellulose and Methyl Cellulose

Journal: International Journal of Biomedical Materials Research PDF

Published: 21-Dec-15 Volume: 3 Issue: 6

DOI:10.11648/j.ijbmr.20150306.12 ISSN: 2330-7560 (Print) 2330-7579 (Online)

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak, Rakesh Kumar Mishra, Snehasis Jana *

Abstract

Cellulose and its derivatives are used as potential matrices for biomaterials and tissue engineering applications. The objective of present research was to investigate the influence of biofield treatment on physical, chemical and thermal properties of ethyl cellulose (EC) and methyl cellulose (MC). The study was performed in two groups (control and treated). The control group remained as untreated, and biofield treatment was given to treated group. The biofield treated polymers are characterized by Fourier transform infrared spectroscopy (FT-IR), CHNSO analysis, X-ray diffraction study (XRD), Differential Scanning calorimetry (DSC), and thermogravimetric analysis (TGA). FT-IR analysis of treated EC showed downward shifting in C-O-C stretching peak from 1091?1066 cm-1 with respect to control. However, the treated MC showed upward shifting of –OH stretching (3413?3475) and downward shifting in C-O stretching (1647?1635 cm-1) vibrations with respect to control MC. CHNSO analysis showed substantial increase in percent hydrogen and oxygen in treated polymers with respect to control. XRD diffractogram of EC and MC affirmed the typical semi-crystalline nature. The crystallite size was substantially increased by 20.54% in treated EC with respect to control. However, the treated MC showed decrease in crystallite by 61.59% with respect to control. DSC analysis of treated EC showed minimal changes in crystallization temperature with respect to control sample. However, the treated and control MC did not show any crystallization temperature in the samples. TGA analysis of treated EC showed increase in thermal stability with respect to control. However, the TGA thermogram of treated MC showed reduction in thermal stability as compared to control. Overall, the result showed substantial alteration in physical, chemical and thermal properties of treated EC and MC.

Evaluation of Isotopic Abundance Ratio in Naphthalene Derivatives After Biofield Energy Treatment Using Gas Chromatography-Mass Spectrometry

Journal: American Journal of Applied Chemistry PDF

Published: 09-Nov-15 Volume: 3 Issue: 6

DOI:10.11648/j.ajac.20150306.13 ISSN: 2330-8753 (Print) 2330-8745 (Online)

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak, Gunin Saikia, Snehasis Jana*

Abstract

Naphthalene and 2-naphthol are two naphthalene derivatives, which play important roles in the chemical and pharmaceutical industries. The aim of this study was to evaluate the impact of biofield energy treatment on the isotopic abundance of 13C/12C or 2H/1H and 18O/16O in naphthalene and 2-naphthol using gas chromatography-mass spectrometry (GC-MS). Naphthalene and 2-naphthol samples were divided into two parts: control and treated. The control group remained as untreated, while the treated group was subjected to Mr. Trivedi’s biofield energy treatment. The treated samples were subdivided into four parts named as T1, T2, T3 and T4. Control and treated samples were characterized using GC-MS. The GC-MS data revealed that the isotopic abundance ratio of 13C/12C or 2H/1H, (PM+1)/PM and 18O/16O, (PM+2)/PM were increased significantly in treated naphthalene and 2-naphthol (where PM-primary molecule, (PM+1) isotopic molecule either for 13C or 2H and (PM+2) is the isotopic molecule for 18O). The isotopic abundance ratio of (PM+1)/PM in the treated T2 samples of naphthalene and 2-naphthol was increased up to 129.40% and 165.40%, respectively as compared to their respective control. However, the isotopic abundance ratio of (PM+1)/PM in the treated T1, T3 and T4 samples of naphthalene was decreased by 44.41%, 33.49% and 30.3%, respectively as compared to their respective control. While in case of 2-naphthol, the isotopic abundance ratio of (PM+1)/PM was decreased by 39.57% in T1 sample and then gradually increased up to 9.85% from T3 to T4 samples. The isotopic abundance ratio of (PM+2)/PM in treated T2 sample of 2-naphthol was increased up to 163.24%, whereas this value was decreased by 39.57% in treated T1 sample. The GC-MS data suggest that the biofield energy treatment has significantly altered the isotopic abundance of 2H, 13C in naphthalene and 2H, 13C and 18O in 2-naphthol as compared to the control.

Influence of Biofield Energy Treatment on Isotopic Abundance Ratio in Aniline Derivatives

Journal: Modern Chemistry & Applications PDF

Published: 02-Oct-15 Volume: 3 Issue: 4

DOI:10.4172/2329-6798.1000168 ISSN: 2329-6798

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak, Gunin Saikia and Snehasis Jana*

Abstract

The aim of this study was to evaluate the impact of biofield energy treatment on the isotopic abundance of 13C/12C or 2H/1H or 15N/14N ? (PM+1)/PM in aniline; and (PM+1)/PM and 81Br/79Br ? (PM+2)/PM in 4-bromoaniline using Gas Chromatography-Mass Spectrometry (GC-MS). Aniline and 4-bromoaniline samples were divided into two parts: control and treated. The control part remained as untreated, while the treated part was subjected to Mr. Trivedi’s biofield energy treatment. The treated samples were subdivided in three parts named as T1, T2, and T3 for aniline and four parts named as T1, T2, T3, and T4 for 4-bromoaniline. The GC-MS data revealed that the isotopic abundance ratio of (PM+1)/PM in aniline was increased from -40.82%, 30.17% and 73.12% in T1, T2 and T3 samples respectively. However in treated samples of 4-bromoaniline the isotopic abundance ratio of PM+1/PM was increased exponentially from -4.36 % (T1) to 368.3% (T4) as compared to the control. A slight decreasing trend of the isotopic ratio of (PM+2)/ PM in 4-bromoaniline was observed after biofield energy treatment. The GC-MS data suggests that the biofield energy treatment has significantly increased the isotopic abundance of 2H, 13C and 15N in the treated aniline and 4-bromoaniline, while slight decreased the isotopic abundance of 81Br in treated 4-bromoaniline as compared to their respective control.

Effect of Biofield Treatment on the Physical and Thermal Characteristics of Aluminium Powders

Journal: Industrial Engineering & Management PDF

Published: 26-Feb-15 Volume: 4 Issue: 1

DOI:10.4172/2169-0316.1000151 ISSN: 2169-0316

Authors: Mahendra Kumar Trivedi, Shrikant Patil* and Rama Mohan R Tallapragada

Abstract

Aluminium powders are used in a wide range from propelling rockets to improving personal hygiene. More popular industrial applications include manufacture of silver metallic pigments, paints, inks, plastics, packaging, textiles and aerospace industry. As thick film pastes used in the manufacture of silicon solar cells, and as reducing agent and sources of heat, used in alumina thermic and exothermic applications.

In the present investigation, Aluminium powders were exposed to non-contact Biofield treatment. Both the exposed and unexposed powders were later characterized by various techniques. The average particle size, after a slight initial decrease was found to increase after 80 days of treatment substantially, which suggested the operation of competing mechanisms fracture and sintering (micro welding). The BET surface area monotonically decreased which was consistent with increase in particle size. SEM photographs showed that samples exposed to Biofield after 38 days showed growth in particle size and particles joined at inter and intra particle boundaries. X-ray diffraction of the powder samples indicated both increase and decrease in crystallite size, unit cell volume, change in nuclear charge per unit volume of atom and atomic weight of samples exposed to Biofield even after 106 days. These results indicated that properties of Aluminium powders could be changed even up to atomic level by exposure to Biofield.

Effect of external energy on atomic, crystalline and powder characteristics of antimony and bismuth powders

Journal: Bulletin of Materials Science PDF

Published: 06-Nov-14 Volume: 32 Issue: 5

DOI:10.1007/s12034-009-0070-4 ISSN: 0250-4707 (Print) 0973-7669 (Online)

Authors: Vikram V. Dabhade, Ram Mohan R. Tallapragada, Mahendra Kumar Trivedi

Abstract

Next to atoms and molecules the powders are the smallest state of matter available in high purities and large quantities. The effect of any external energy on the shape, morphology and structure can thus be studied with relative ease. The present investigation deals with the effect of a non-contact external energy on the powders of antimony and bismuth. The characteristics of powders treated by external energy are compared with the as received powders (control). The average particle sizes, d50 and d99, the sizes below which 99% of the particles are present showed significant increase and decrease indicating that the energy had caused deformation and fracture as if the powders have been subjected to high energy milling.

To be able to understand the reasons for these changes the powders are characterized by techniques such as X-ray diffraction (XRD), surface area determination (BET), thermal analytical techniques such as DTA–DTG, DSC–TGA and SDTA and scanning electron microscopy (SEM).

The treated powder samples exhibited remarkable changes in the powder characteristics at all structural levels starting from polycrystalline particles, through single crystal to atoms. The external energy had changed the lattice parameters of the unit cell which in turn changed the crystallite size and density. The lattice parameters are then used to compute the weight and effective nuclear charge of the atom which showed significant variation. It is speculated that the external energy is acting on the nucleus through some reversible weak interaction of larger cross section causing changes in the proton to neutron ratios. Thus the effect is felt by all the atoms, and hence the unit cell, single crystal grain and grain boundaries. The stresses generated in turn may have caused deformation or fracture of the weak interfaces such as the crystallite and grain boundaries.

Effect of superconsciousness external energy on atomic, crystalline and powder characteristics of carbon allotrope powders

Journal: Materials Research Innovations

Published: 01-Dec-09 Volume: 13 Issue: 4

DOI:10.1179/143289109X12494867167602 ISSN: Not Available

Authors: M. K. Trivedi; R. R. Tallapragada

Abstract

Scientists are searching for eluding link between spirituality and science. Some believe fundamental essences of universe to be energy and information. As per current understanding, energy and matter always coexisted and is considered one and the same. Energy is considered as 'matter in perpetual motion' and matter as 'stationary energy'. Interconversion between matter and energy has been defined by Einstein's famous energy–mass equation (E=mc2) which has been proven by nuclear physicists using complex nuclear reactions involving high energy particles. However, many spiritual masters have claimed to realise this energy–matter interconversion using their spiritual powers/energy but scientifically unknown and unverified. It is the first time that the lead author (M. K. Trivedi) has been using his unique superconsciousness energy in the form of thought intervention and information signals to bring about dramatic and radical transformations in the physical and structural properties of organic and inorganic materials. The present paper is the first scientific report that deals with the effect of consciousness energy which M. K. Trivedi uniquely communicates through thought intervention by sending an information signal that transforms carbon allotropes. The changes the energy has caused at the atomic, molecular and crystalline levels in diamond, graphite and activated charcoal have been studied very systematically and are reported in this paper. It has been observed that the superconsciousness energy when transmitted to carbon allotropes has changed the lattice parameters of unit cells, crystallite sizes and densities. Computed weight and effective nuclear charge of the treated atoms exhibited significant variation. It is believed that the energy is acting on the nuclei causing their transmutation.

Effect of Bio Field Treatment on the Physical and Thermal Characteristics of Silicon, Tin and Lead Powders

Journal: Journal of Material Sciences & Engineering PDF

Published: 08-Sep-13 Volume: 2 Issue: 3

DOI:10.4172/2169-0022.1000125 ISSN: 2169-0022

Authors: Mahendra K Trivedi, Shrikant Patil and Rama Mohan Tallapragada

Abstract

Silicon, tin and lead powders belong to group IV in periodic table and exhibit decreasing semi conducting nature towards the bottom of the group. These are very useful in producing non ferrous powder metallurgy components.

In the present investigation silicon, tin and lead powders are exposed to bio field. Both the exposed and unexposed powders are later characterized by various techniques. The average particle size, after an initial decrease is found to increase with increase in number of days after treatment although the size is lee than that exhibited by untreated powder, suggesting the operation of competing mechanisms fracture and sintering. The BET surface area increased slightly in silicon powder but did not change in tin and lead powders. SEM photographs showed that samples exposed to bio field after 20 days showed fracture paths and fractures at inter and intra particle boundaries in treated powders. Thermal analysis indicated a decrease in heat of reaction and decrease in mass in treated samples.

X-ray diffraction of the powder samples indicated both increase and decrease in crystallite size, unit cell volume and molecular weight of samples exposed to bio field even after 179 days.

These results indicate that the properties of the metallic powders can be controlled even up to atomic level by exposing to bio field.

Effect of Bio Field Treatment on the Physical and Thermal Characteristics of Vanadium Pentoxide Powders

Journal: Journal of Material Sciences & Engineering PDF

Published: 05-Jan-13 Volume: S Issue: 11

DOI:10.4172/2169-0022.S11-001 ISSN: 2169-0022

Authors: Mahendra K Trivedi, Shrikant Patil* and Rama Mohan Tallapragada

Abstract

Vanadium pentoxide powders are very useful in producing ferrous as well as aluminium alloys, in removing carbon and sulphur and as catalysts in synthesizing ammonia and sulphuric acid. It is also used as corrosion inhibitor petroleum and chemical processing.

In the present investigation V2O5 powders are exposed to biofield. Both the exposed and unexposed powders are later characterized by various techniques. The average particle size is found to decrease with increase in number of days after treatment up to a maximum of 15.9% in 110 days indicating severe fracture at agglomerate/ crystallite boundaries. The BET surface area showed a surprising decrease (it should increase as particle size is decreased) of 7.22% in 109 days indicating the surface densification/ removal of sharp surface corners/ formation of large particles. SEM photographs indeed showed that samples exposed to biofield after 20 days showed increase in size as well as rounded corners. Thermal analysis indicated an increase in melting temperature by 9.9% in samples treated after 57 days along with a much reduced change in weight.

X-ray diffraction of the powder samples indicated both increase and decrease in crystallite size, unit cell volume and molecular weight of samples exposed to biofield after 28, 104, 124 and 139 days.

These results indicate that the catalytic nature of vanadium pentoxide can be controlled by exposing to bio field and using after a specific number of days after exposure.

Atomic, Crystalline and Powder Characteristics of Treated Zirconia and Silica Powders

Journal: Journal of Material Sciences & Engineering PDF

Published: 06-Nov-14 Volume: 3 Issue: 3

DOI:10.4172/2169-0022.1000144 ISSN: 2169-0022

Authors: Mahendra K Trivedi, Shrikant Patil* and Rama Mohan Tallapragada

Abstract

Zirconium oxide and silicon dioxide powders are selected and subjected to a non-contact Biofield energy known to be transmitted by Mahendra Kumar Trivedi. Particle sizes d50 and d99 showed up to 71.5 percent decrease indicating that the energy had caused deformation and fracture as if the powders have been subjected to high energy milling. This is also supported by increase in specific surface area up to 19.48 percent.

In the present investigation Zirconium oxide and silicon dioxide powders are exposed to Bio-field. Both the exposed and unexposed powders are later characterized by various techniques. The treated powders when characterized by X-ray diffraction are found to exhibit significant increase and decrease in the lattice parameters of the unit cell, crystallite size and density. The lattice parameters are then used to compute the molecular weight and total number of protons and neutrons in the molecule, which showed an increase up to 0.24 and decrease up to 0.31 percent. It is speculated that the Biofield energy transmitted by Mr. Trivedi is acting on the nucleus in the atoms through some reversible weak interaction of larger cross section causing changes in the proton to neutron ratios and thus energy to mass and mass to energy. Thus the effect is felt by all the atoms, and hence the unit cell, single crystal grain and grain boundaries. The stresses generated in turn may have caused deformation and fracture of the weak interfaces in the polycrystalline powders such as the crystallite and grain boundaries.

Evaluation of Biofield Modality on Viral Load of Hepatitis B and C Viruses

Journal: Journal of Antivirals & Antiretrovirals PDF

Published: 24-Jul-15 Volume: 7 Issue: 3

DOI:10.4172/jaa.1000123 ISSN: 1948-5964

Authors: Mahendra Kumar Trivedi, Shrikant Patil, Harish Shettigar, Sambhu Charan Mondal and Snehasis Jana*

Abstract

Study background: Nowadays, hepatitis is a major challenge for clinical research, regulatory bodies, and clinicians who are trying to assess the more effectiveness of antiviral therapy against patients. Viral load count is the amount of particular viral DNA or RNA in a blood samples. It is one of the surrogate biomarker of hepatitis. High viral load indicates that the immune system is failed to fight against viruses. The aim of this study was to evaluate the impact of biofield modality on hepatitis B virus (HBV) and hepatitis C virus (HCV) in terms of viral load as surrogate marker.

Method: The viral load assay was performed on stock human plasma samples of HBV and HCV before and after 7 days of biofield treatment using Roche COBAS® AMPLICOR analyzer according to manufacturer’s instructions. Viremia (viral DNA for HBV, RNA for HCV) was considered as surrogate marker for assessment of the impact of Mr. Trivedi’s biofield treatment.

Result: The viral load of HBV DNA in infected plasma samples showed a significant alteration in the biofield treated group as compared to control. Additionally, viral load count of HCV RNA in infected plasma samples was significantly reduced by 67% in the biofield treated group as compared to control. As the biofield treatment has significantly reduced HCV RNA, it could be beneficial for particularly HCV infected populations.

Conclusion: Altogether, data suggest that biofield treatment has significantly alteration in HBV and reduced the viral load count in HCV infected plasma samples and could be a suitable alternative treatment strategy for hepatitis patients in near future.