Thermal, Spectroscopic and Chromatographic Characterization of Biofield Energy Treated Benzophenone

Journal: Science Journal of Analytical Chemistry PDF

Published: 09-Nov-15 Volume: 3 Issue: 6

DOI:10.11648/j.sjac.20150306.15 ISSN: 2376-8045 (Print) 2376-8053 (Online)

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak, Gunin Saikia, Snehasis Jana

Abstract

The aim of the present study was to evaluate the impact of biofield energy treatment on the thermal, spectroscopic, and chemical properties of benzophenone. The study was done using various analytical methods such as gas chromatography-mass spectrometry (GC-MS), high performance liquid chromatography (HPLC), differential scanning calorimetry (DSC), Fourier transform infrared (FT-IR) spectroscopy, and ultraviolet-visible (UV-Vis) spectroscopy. The benzophenone sample was divided into two parts, one part was subjected to Mr. Trivedi’s biofield energy treatment, called as treated and the other part was remained as untreated, called as control. Mass spectra showed the molecular ion peak at m/z = 182 in control and all the treated benzophenone samples with different intensities (treated samples further divided in to three parts, T1, T2, and T3 for GC-MS study). The isotopic abundance ratio of 2H/1H, 13C/12C (PM+1)/PM and in treated sample was decreased by 44.87% in T2 and slightly increased upto 5.79% in case of T1 as compared to the control [where, PM- primary molecule, (PM+1)- isotopic molecule either for 13C or 2H]. Moreover, isotopic abundance ratio of 18O/16O (PM+2)/PM in the treated sample was increased up to 22.64% in T3. The retention time of treated benzophenone was slightly increased (0.88 min) as compared to the control in HPLC chromatogram. The DSC data exhibited that the heat of degradation of treated benzophenone was increased by 674.16% as compared to the control. While, C=O stretching frequency of treated sample was shifted by 6 cm-1 to low energy region in FT-IR spectroscopy. Further, the UV-Vis spectra of control sample showed characteristic absorption peaks at 210 nm and 257 nm that was blue shifted to 205 nm and 252 nm, respectively in the treated sample. These results suggested that biofield treatment has significantly altered the thermal, spectroscopic, and chemical properties of benzophenone, which could make them more useful as reaction intermediate in industrial applications.

Characterization of Physical, Spectroscopic and Thermal Properties of Biofield Treated Biphenyl

Journal: American Journal of Chemical Engineering PDF

Published: 13-Nov-15 Volume: 3 Issue: 5

DOI:10.11648/j.ajche.20150305.11 ISSN: 2330-8605 (Print) 2330-8613 (Online)

Authors: Mahendra Kumar Trivedi, Rama Mohan Tallapragada, Alice Branton, Dahryn Trivedi, Gopal Nayak, Rakesh Kumar Mishra, Snehasis Jana

Abstract

Biphenyl is used as an intermediate for synthesis of various pharmaceutical compounds. The objective of present research was to investigate the influence of biofield treatment on physical, spectroscopic and thermal properties of biphenyl. The study was performed in two groups (control and treated). The control group remained as untreated, and biofield treatment was given to treated group. The control and treated biphenyl were characterized by X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, Ultravioletvisible (UV-Vis) spectroscopy and surface area analysis. The treated biphenyl showed decrease in intensity of XRD peaks as compared to control. Additionally, crystallite size was decreased in treated biphenyl by 16.82% with respect to control. The treated biphenyl (72.66ºC) showed increase in melting temperature as compared to control biphenyl (70.52ºC). However, the latent heat of fusion (ΔH) of treated biphenyl was substantially changed by 18.75% as compared to control. Additionally, the treated biphenyl (155.14ºC) showed alteration in maximum thermal decomposition temperature (Tmax) as compared to control sample (160.97ºC). This showed the alteration in thermal stability of treated biphenyl as compared to control. Spectroscopic analysis (FT-IR and UV-visible) showed no alteration in chemical nature of treated biphenyl with respect to control. Surface area analysis through Brunauer-Emmett-Teller analysis (BET) analyzer showed significant alteration in surface area as compared to control. Overall, the result demonstrated that biofield has substantially affected the physical and thermal nature of biphenyl.

Characterization of Physical, Thermal and Spectral Properties of Biofield Treated 2,6-Dichlorophenol

Journal: American Journal of Chemical Engineering PDF

Published: 13-Nov-15 Volume: 3 Issue: 5

DOI:10.11648/j.ajche.20150305.12 ISSN: 2330-8605 (Print) 2330-8613 (Online)

Authors: Mahendra Kumar Trivedi, Rama Mohan Tallapragada, Alice Branton, Dahryn Trivedi, Gopal Nayak, Rakesh Kumar Mishra, Snehasis Jana

Abstract

2,6-Dichlorophenol (2,6-DCP) is a compound used for the synthesis of chemicals and pharmaceutical agents. The present work is intended to evaluate the impact of Mr. Trivedi’s biofield energy treatment on physical, thermal and spectral properties of the 2,6-DCP. The control and treated 2,6-DCP were characterized by various analytical techniques such as X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, and ultra violet-visible spectroscopy (UV-vis) analysis. The XRD results showed the increase in crystallite size of treated sample by 28.94% as compared to the control sample. However, the intensity of the XRD peaks of treated 2,6-DCP were diminished as compared to the control sample. The DTA analysis showed a slight increase in melting temperature of the treated sample. Although, the latent heat of fusion of the treated 2,6-DCP was changed substantially by 28% with respect to the control sample. The maximum thermal decomposition temperature (Tmax) of the treated 2,6-DCP was decreased slightly in comparison with the control. The FT-IR analysis showed a shift in C=C stretching peak from 1464→1473 cm-1 in the treated sample as compared to the control sample. However, the UV-vis analysis showed no changes in absorption peaks of treated 2,6-DCP with respect to the control sample. Overall, the result showed a significant effect of biofield energy treatment on the physical, thermal and spectral properties of 2,6-DCP. It is assumed that increase in crystallite size and melting temperature of the biofield energy treated 2,6-DCP could alleviate its reaction rate that might be a good prospect for the synthesis of pharmaceutical compounds.

Experimental Investigation on Physical, Thermal and Spectroscopic Properties of 2-Chlorobenzonitrile: Impact of Biofield Treatment

Journal: Modern Chemistry PDF

Published: 09-Nov-15 Volume: 3 Issue: 4

DOI:10.11648/j.mc.20150304.11 ISSN: 2329-1818 (Print) 2329-180X (Online)

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak, Ragini Singh, Snehasis Jana

Abstract

2-chlorobenzonitrile (2-ClBN) is widely used in the manufacturing of azo dyes, pharmaceuticals, and as intermediate in various chemical reactions. The aim of present study was to evaluate the impact of biofield treatment on physical, thermal and spectroscopic properties of 2-ClBN. 2-ClBN sample was divided into two groups that served as treated and control. The treated group received Mr. Trivedi’s biofield treatment. Subsequently, the control and treated samples were evaluated using X-ray diffraction (XRD), surface area analyser, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) and ultraviolet-visible (UV-Vis) spectroscopy. XRD result showed a decrease in crystallite size in treated samples i.e. 4.88% in 2-ClBN along with the increase in peak intensity as compared to control. However, surface area analysis showed a decrease in surface area of 64.53% in treated 2-ClBN sample as compared to the control. Furthermore, DSC analysis results showed a significant increase in the latent heat of fusion (28.74%) and a slight increase in melting temperature (2.05%) in treated sample as compared to the control. Moreover, TGA/DTG studies showed that the control and treated 2-ClBN samples lost 61.05% and 46.15% of their weight, respectively. The FT-IR spectra did not show any significant change in treated 2-ClBN sample as compared to control. However, UV-Vis spectra showed an increase in the intensity of peak as compared to control sample. These findings suggest that biofield treatment has significantly altered the physical, thermal and spectroscopic properties of 2-ClBN, which could make them more useful as a chemical intermediate.

Physicochemical and Spectroscopic Characteristics of Biofield Treated p-Chlorobenzophenone

Journal: American Journal of Physical Chemistry PDF

Published: 09-Nov-15 Volume: 4 Issue: 6

DOI:10.11648/j.ajpc.20150406.12 ISSN: 2327-2430 (Print) 2327-2449 (Online)

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak, Khemraj Bairwa, Snehasis Jana

Abstract

p-Chlorobenzophenone (p-CBP) is the important chemical intermediate used for the synthesis of several pharmaceutical drugs like fenofibrate, cetirizine, alprazolam, and benzodiazepine. The aim of this study was set to evaluate the impact of biofield energy treatment on physicochemical and spectroscopic properties of p-CBP. The study was accomplished in two groups i.e. control and treated. The treated group was subjected to Mr. Trivedi’s biofield energy treatment. Subsequently, the control and treated samples of p-CBP were analyzed using X-ray diffraction (XRD), particle size analyzer, surface area analyzer, differential scanning calorimetry (DSC), thermogravimetric analysis-derivative thermogravimetric analysis (TGA-DTG), Fourier transform infrared (FT-IR), and ultraviolet-visible (UV-Vis) spectroscopy. The XRD study exhibited the increase in average crystallite size (25.93%) as well as the intensity of XRD peaks of treated p-CBP, as compared to the control. The particle size analysis showed the reduction in particle size of fine particles (≤51.49 μm) by 21.6% (d10), whereas, increase in particle size of large particles (≥433.59 μm) by 12.82% (d90) and 17.71% (d99), respectively after biofield treatment, as compared to the control. The surface area analysis exhibited the surface area as 0.7005 m2/g in control and 0.7020 m2/g in treated sample of p-CBP. The DSC thermogram of treated p-CBP exhibited the slight decrease in melting temperature. However, the latent heat of fusion was significantly altered (24.90%) after biofield energy treatment as compared to the control. TGA analysis showed the weight loss by 57.36% in control and 58.51% in treated sample. In addition, the onset temperature of thermal degradation was also decreased by 6.32% after biofield energy treatment as compared to the control p- CBP. The FT-IR and UV spectroscopic study did not show the alteration in the wavenumber and wavelength, respectively in treated p-CBP as compared to the control. Altogether, the XRD, particle size and thermal analysis suggest that biofield energy treatment has significant impact on physical and thermal properties of treated p-CBP.

Evaluation of Atomic, Physical and Thermal Properties of Tellurium Powder: Impact of Biofield Energy Treatment

Journal: Electrical & Electronic Systems PDF

Published: 30-Oct-15 Volume: 4 Issue: 3

DOI:10.4172/2332-0796.1000162 ISSN: 2332-0796

Authors: Trivedi MK, Tallapragada RM, Branton A, Dahryn Trivedi, Nayak G, Latiyal OP and Jana S

Abstract

Tellurium has gained significant attention due to its photoconductivity, piezoelectricity, and thermo conductivity properties. The aim of this study was to evaluate the effect of biofield energy treatment on thermal, physical and atomic properties of tellurium powder. The tellurium powder was equally divided in two parts: control and treated (T). The treated part was subjected to Mr. Trivedi’s biofield energy treatment, whereas the control part was remained untreated. Subsequently, the control and treated samples were characterized using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and Fourier transform infrared (FT-IR) spectroscopy. The DSC data showed that latent heat of fusion was decreased by 14.13, 21.90, and 5.55% in treated samples T1, T2, and T3, respectively as compared to the control. However, the melting temperature did not show any change in treated samples as compared to the control. The TGA data showed that the peak width (difference in onset and endset) was increased from 213.67°C (control) to 234.82°C in treated tellurium sample. Besides, XRD results exhibited an alteration in lattice parameter, unit cell volume, density, atomic weight and nuclear charge volume of the treated tellurium powder as compared to the control. In addition, the crystallite sizes were significantly changed on crystalline plane (102) and (110) as 146.05→48.67 nm and 63.01→88.21 nm, respectively in the treated tellurium. The FT-IR spectra did not show any significant change in absorption frequencies in treated sample as compared to the control. Therefore, DSC, TGA and XRD data suggested that Mr. Trivedi’s biofield energy treatment has significantly altered the thermal and physical properties of tellurium powder. Thus, biofield energy treatment could be applied to modulate the thermal and physical properties in semiconductor and chalcogenide glass industries.

Characterization of Physical, Thermal and Spectroscopic Properties of Biofield Energy Treated P-Phenylenediamine and p-Toluidine

Journal: Environmental & Analytical Toxicology PDF

Published: 03-Nov-15 Volume: 5 Issue: 6

DOI:10.4172/2161-0525.1000329 ISSN: 2161-0525

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak , Ragini Singh and Snehasis Jana

Abstract

Aromatic amines and their derivatives are widely used in the production of dyes, cosmetics, medicines and polymers. However, they pose a threat to the environment due to their hazardous wastes as well as their carcinogenic properties. The objective of the study was to use an alternate strategy i.e. biofield energy treatment and analyse its impact on physicochemical properties of aromatic amine derivatives viz. p-phenylenediamine (PPD) and p-toluidine. For this study, both the samples were taken and divided into two parts. One part was considered as control and another part was subjected to Mr. Trivedi’s biofield treatment. After treatment, both samples were analysed for their physical, thermal and spectral properties as compared to their respective control samples. The analysis was done by using X-ray diffraction (XRD), surface area analyser, thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR), and ultraviolet-visible (UV-Vis) spectroscopy. The XRD studies and surface area analysis of PPD sample revealed that the crystallite size and surface area of the treated sample was increased by 11.12% and 8.49%, respectively as compared to the control sample. In case of p-toluidine, the crystallite size and surface area of treated sample were decreased by 4.8% and 8.43%, respectively as compared to control. The treated PPD sample also showed an alteration in thermal degradation properties as it exhibited two-steps thermal decomposition as compared to single step decomposition in the control sample. In case of p-toluidine, the treated sample showed decreased onset temperature of degradation (112°C→100°C) and Tmax (temperature at which maximum weight loss occur) (136°C→125°C) as compared to control sample. Moreover, the FT-IR analysis revealed that C-C aromatic stretching peak in treated PPD sample was shifted to the lower frequency (1456→1444 cm-1) as compared to the control sample. Besides, in p-toluidine, the treated sample showed the alteration in frequencies of C-N-H bending, C-H bending, C-H stretching, and C-C aromatic stretching and bending peaks as compared to the control sample. However, no alteration was found in UV-Vis spectroscopic analysis of treated PPD and p-toluidine samples as compared to their respective control samples. These findings suggest that the biofield treatment significantly altered the physical, thermal and IR spectroscopic properties of PPD and p-toluidine samples.

Physical, Thermal and Spectroscopic Characterization of Biofield Treated p-Chloro-m-cresol

Journal: Chemical Engineering & Process Technology PDF

Published: 03-Oct-15 Volume: 6 Issue: 5

DOI:10.4172/2157-7048.1000249 ISSN: 2157-7048

Authors: Mahendra Kumar Trivedi, Alice Branton , Dahryn Trivedi, Gopal Nayak , Ragini Singh and Snehasis Jana

Abstract

The Potential Impact of Biofield Energy Treatment on the Physical and Thermal Properties of Silver Oxide Powder

Journal: International Journal of Biomedical Science and Engineering PDF

Published: 15-Oct-15 Volume: 3 Issue: 5

DOI:10.11648/j.ijbse.20150305.11 ISSN: 2376-7227 (Print) 2376-7235 (Online)

Authors: Mahendra Kumar Trivedi, Rama Mohan Tallapragada , Alice Branton , Dahryn Trivedi , GopalNayak, Omprakash Latiyal, Snehasis Jana

Abstract

Silver oxide has gained significant attention due to its antimicrobial activities. The purpose of this study was to evaluate the impact of biofield energy treatment on the physical and thermal properties of silver oxide (Ag2O). The silver oxide powder was divided into two parts, one part was kept as control and another part was received Mr. Trivedi’s biofield energy treatment. The control and treated samples were analyzed using X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and Fourier transform infrared (FT-IR) spectroscopy. The XRD diffractogram showed that the crystallite size of treated sample was significantly altered on the planes (200), (311), and (220) by 100, 150 and -25% respectively, with respect to control. The DSC result exhibited that the thermal energy required to decompose the silver oxide to silver and oxygen was altered from -12.47 to 71.58% in treated samples as compared to the control. TGA showed that the onset temperature of thermal degradation was reduced from 335°C (control) to 322.4°C. In addition, the rate of weight loss in treated sample was increased by 4.14% as compared to the control. Besides, the FT-IR did not show any alteration in absorption wavenumber of treated sample as compared to the control. Hence, the XRD, DSC and TGA data revealed that the biofield energy treatment has a significant impact on the physical and thermal properties of silver oxide powder. Therefore, the biofield energy treatment might improve the dissolution rate in formulation and bioavailability of treated silver oxide as compared to control.

Spectral and Thermal Properties of Biofield Energy Treated Cotton

Journal: American Journal of Energy Engineering PDF

Published: 09-Nov-15 Volume: 3 Issue: 6

DOI:10.11648/j.ajee.20150306.12 ISSN: 2329-1648 (Print) 2329-163X (Online)

Authors: Mahendra Kumar Trivedi, Rama Mohan Tallapragada, Alice Branton, Dahryn Trivedi, Gopal Nayak, Rakesh Kumar Mishra, Snehasis Jana

Abstract

Cotton has widespread applications in textile industries due its interesting physicochemical properties. The objective of this study was to investigate the influence of biofield energy treatment on the spectral, and thermal properties of the cotton. The study was executed in two groups namely control and treated. The control group persisted as untreated, and the treated group received Mr. Trivedi’s biofield energy treatment. The control and treated cotton were characterized by different analytical techniques such as differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), fourier transform infrared (FT-IR) spectroscopy, and CHNSO analysis. DSC analysis showed a substantial increase in exothermic temperature peak of the treated cotton (450 ºC) as compared to the control sample (382ºC). Additionally, the enthalpy of fusion (ΔH) was significantly increased by 86.47% in treated cotton. The differential thermal analysis (DTA) analysis showed an increase in thermal decomposition temperature of treated cotton (361ºC) as compared to the control sample (358ºC). The result indicated the increase in thermal stability of the treated cotton in comparison with the control. FT-IR analysis showed an alterations in –OH stretching (3408→3430 cm-1), carbonyl stretching peak (1713-1662 cm-1), C-H bending (1460-1431 cm-1), -OH bending (580-529 cm-1) and –OH out of plane bending (580-529 cm-1) of treated cotton with respect to the control sample. CHNSO elemental analysis showed a substantial increase in the nitrogen percentage by 19.16% and 2.27% increase in oxygen in treated cotton as compared to the control. Overall, the result showed significant changes in spectral and thermal properties of biofield energy treated cotton. It is assumed that biofield energy treated cotton might be interesting for textile applications.

Studies on Physicochemical Properties of Biofield Treated 2,4-Dichlorophenol

Journal: American Journal of Environmental Protection PDF

Published: 09-Nov-15 Volume: 4 Issue: 6

DOI:10.11648/j.ajep.20150406.15 ISSN: 2328-5680 (Print) 2328-5699 (Online)

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak, Ragini Singh, Snehasis Jana

Abstract

Analysis of Physical, Thermal, and Structural Properties of Biofield Energy Treated Molybdenum Dioxide

Journal: International Journal of Materials Science and Applications PDF

Published: 09-Nov-15 Volume: 4 Issue: 5

DOI:10.11648/j.ijmsa.20150405.21 ISSN: 2327-2635 (Print) 2327-2643 (Online)

Authors: Mahendra Kumar Trivedi, Rama Mohan Tallapragada, Alice Branton, Dahryn Trivedi, Gopal Nayak, Omprakash Latiyal, Snehasis Jana

Abstract

Molybdenum dioxide (MoO2) is known for its catalytic activity toward reforming hydrocarbons. The objective of this study was to evaluate the effect of biofield energy treatment on physical, thermal, and structural properties in MoO2. The MoO2 powder sample was divided into two parts, one part was remained as untreated, called as control, while the other part was subjected to Mr. Trivedi’s biofield energy treatment and called as treated. Both control and treated samples were investigated using X-ray diffraction (XRD), thermogravimetric analysis (TGA), and Fourier transform infrared (FT-IR) spectroscopy. The XRD data exhibited that the biofield treatment has altered the lattice parameters, unit cell volume, density and molecular weight of the treated sample as compared to the control. The TGA study revealed that the onset temperature of thermal degradation of MoO2 was reduced from 702.87°C to 691.92°C. Besides, the FT-IR spectra exhibited that the absorption band corresponding to Mo=O stretching vibration was shifted to lower wavenumber i.e. 975 cm-1 (control) to 970 cm-1 in treated sample. Hence, above results suggested that biofield energy treatment has altered the physical, thermal, and structural properties in MoO2 powder. Therefore, the biofield treatment could be applied to modify the catalytic properties of MoO2 in pharmaceutical industries.

Evaluation of Physical and Structural Properties of Biofield Energy Treated Barium Calcium Tungsten Oxide

Journal: Advances in Materials PDF

Published: 09-Nov-15 Volume: 4 Issue: 6

DOI:10.11648/j.am.20150406.11 ISSN: 2327-2503 (Print) 2327-252X (Online)

Authors: Mahendra Kumar Trivedi, Rama Mohan Tallapragada, Alice Branton, Dahryn Trivedi, Gopal Nayak, Omprakash Latiyal, Snehasis Jana

Abstract

Barium calcium tungsten oxide (Ba2CaWO6) is known for its double perovskite-type crystal structure. The present study was designed to see the effect of biofield energy treatment on physical, atomic, and structural properties of Ba2CaWO6. In this study, Ba2CaWO6 powder sample was divided into two parts, one part was remained as untreated, denoted as control, while the other part was subjected to Mr. Trivedi’s biofield energy treatment and coded as treated. After that, the control and treated samples were analyzed using X-ray diffraction (XRD), surface area analyzer, Fourier transform infrared (FT-IR), and electron spin resonance (ESR) spectroscopy. The XRD data revealed that the crystallite size was decreased by 20% in the treated Ba2CaWO6 sample as compared to the control. The surface area of treated Ba2CaWO6 was increased by 9.68% as compared to the control sample. The FT-IR spectroscopic analysis exhibited that the absorbance band corresponding to stretching vibration of W-O bond was shifted to higher wavenumber from 665 cm-1 (control) to 673 cm-1 after biofield energy treatment. The ESR spectra showed that the signal width and height were decreased by 88.9 and 90.7% in treated Ba2CaWO6 sample as compared to the control. Therefore, above result revealed that biofield energy treatment has a significant impact on the physical and structural properties of Ba2CaWO6.

Evaluation of Biofield Energy Treatment on Physical and Thermal Characteristics of Selenium Powder

Journal: Journal of Food and Nutrition Sciences PDF

Published: 09-Nov-15 Volume: 3 Issue: 6

DOI:10.11648/j.jfns.20150306.14 ISSN: 2330-7285 (Print) 2330-7293 (Online)

Authors: Mahendra Kumar Trivedi, Rama Mohan Tallapragada, Alice Branton, Dahryn Trivedi, Gopal Nayak, Omprakash Latiyal, Snehasis Jana

Abstract

Selenium (Se) is an essential trace element, and its deficiency in the humans leads to increase the risk of various diseases, such as cancer and heart diseases. The objective of this study was to investigate the influence of biofield energy treatment on the physical and thermal properties of the selenium powder. The selenium powder was divided into two parts denoted as control and treated. The Control part was remained as untreated and treated part received Mr. Trivedi’s biofield energy treatment. Both control and treated selenium samples were characterized using x-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis – differential thermal analysis (TGA-DTA), and Fourier transform infrared spectroscopy (FT-IR). The XRD data showed that biofield energy treatment has slightly altered the lattice parameter (0.07%), unit cell volume (0.15%), density (-0.14%), atomic weight (0.15%), and nuclear charge per unit volume (-0.21%) in the treated selenium powder as compared to the control. The crystallite size of the treated selenium powder was reduced considerably from 106.98 nm (control) to 47.55 nm. The thermal analysis study showed that the latent heat of fusion was 64.61 J/g in the control, which changed to 68.98, 52.70, 49.71 and 72.47 J/g in the treated T1, T2, T3, and T4 samples respectively. However, the melting temperature did not show any considerable change in the treated selenium samples as compared to the control. The FT-IR spectra showed the absorption peak at 526 and 461 cm-1, which corresponding to metal oxide bonding vibration in the control and treated selenium powder respectively. Hence, overall data suggest that, the biofield energy treatment considerably altered the physical and thermal properties of selenium powder. Therefore, biofield energy treatment could make selenium even more useful nutrient in human body.

Evaluation of Atomic, Physical, and Thermal Properties of Bismuth Oxide Powder: An Impact of Biofield Energy Treatment

Journal: American Journal of Nano Research and Applications PDF

Published: 09-Nov-15 Volume: 3 Issue: 6

DOI:10.11648/j.nano.20150306.11 ISSN: Not Available

Authors: Mahendra Kumar Trivedi, Rama Mohan Tallapragada, Alice Branton, Dahryn Trivedi, Gopal Nayak, Omprakash Latiyal, Snehasis Jana

Abstract

Bismuth oxide (Bi2O3) is known for its application in several industries such as solid oxide fuel cells, optoelectronics, gas sensors and optical coatings. The present study was designed to evaluate the effect of biofield energy treatment on the atomic, physical, and thermal properties of Bi2O3. The Bi2O3 powder was equally divided into two parts: control and treated. The treated part was subjected to biofield energy treatment. After that, both control and treated samples were investigated using X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, and electron spin resonance (ESR) spectroscopy. The XRD data exhibited that the biofield treatment has altered the lattice parameter (-0.19%), unit cell volume (-0.58%), density (0.59%), and molecular weight (-0.57%) of the treated sample as compared to the control. The crystallite size was significantly increased by 25% in treated sample as compared to the control. Furthermore, TGA analysis showed that control and treated samples were thermally stable upto tested temperature of 831°C. Besides, the FT-IR analysis did not show any significant change in absorption wavenumber in the treated sample as compared to the control. The ESR study revealed that g-factor was increased by 13.86% in the treated sample as compared to the control. Thus, above data suggested that biofield energy treatment has altered the atomic and physical properties of Bi2O3. Therefore, the biofield treated Bi2O3 could be more useful in solid oxide fuel cell industries.

Physical, Atomic and Thermal Properties of Biofield Treated Lithium Powder

Journal: Advanced Chemical Engineering PDF

Published: 21-Sep-15 Volume: 5 Issue: 4

DOI:10.4172/2090-4568.1000136 ISSN: 2090-4568

Authors: Mahendra Kumar Trivedi, Rama Mohan Tallapragada , Alice Branton, Dahryn Trivedi, Gopal Nayak, Omprakash Latiyal and Snehasis Jana

Abstract

Lithium has gained extensive attention in medical science due to mood stabilizing activity. The objective of the present study was to evaluate the impact of biofield treatment on physical, atomic, and thermal properties of lithium powder. The lithium powder was divided into two parts i.e., control and treatment. Control part was remained as untreated and treatment part received Mr. Trivedi’s biofield treatment. Subsequently, control and treated lithium powder samples were characterized using X-ray diffraction (XRD), Differential scanning calorimetry (DSC), Thermogravimetric analysis-differential thermal analysis (TGA-DTA), Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). XRD data showed that lattice parameter, unit cell volume, density, atomic weight, and nuclear charge per unit volume of lithium were altered after biofield treatment. The crystallite size of treated lithium was increased by 75% as compared to control. DSC analysis exhibited an increase in melting temperature of treated lithium powder upto 11.2% as compared to control. TGA-DTA analysis result showed that oxidation temperature, which found after melting point, was reduced upto 285.21°C in treated lithium as compared to control (358.96°C). Besides, SEM images of control and treated lithium samples showed the agglomerated micro particles. Moreover, FT-IR analysis data showed an alteration in absorption band (416→449 cm-1) in treated lithium sample after biofield treatment as compared to control. Overall, data suggested that biofield treatment has significantly altered the physical, atomic, and thermal properties of lithium powder.

Impact of Biofield Treatment on Chemical and Thermal Properties of Cellulose and Cellulose Acetate

Journal: Bioengineering & Biomedical Science PDF

Published: 07-Aug-15 Volume: 5 Issue: 3

DOI:10.4172/2155-9538.1000162 ISSN: 2155-9538

Authors: Mahendra Kumar Trivedi, Gopal Nayak, Shrikant Patil*, Rama Mohan Tallapragada and Rakesh Mishra

Abstract

Cellulose being an excellent biopolymer has cemented its place firmly in many industries as a coating material, textile, composites, and biomaterial applications. In the present study, we have investigated the effect of biofield treatment on physicochemical properties of cellulose and cellulose acetate. The cellulose and cellulose acetate were exposed to biofield and further the chemical and thermal properties were investigated. X-ray diffraction study asserted that the biofield treatment did affect the crystalline nature of cellulose. The percentage of crystallite size was found increased significantly in treated cellulose by 159.83%, as compared to control sample. This showed that biofield treatment was changing the crystalline nature of treated cellulose. However treated cellulose acetate showed a reduction in crystallite size (-17.38%) as compared to control sample. Differential Scanning Calorimetry (DSC) of treated cellulose showed no improvement in melting temperature as compared to control sample. Contrarily cellulose acetate showed significant improvement in melting temperature peak at 351.91ºC as compared to control (344ºC) polymer. Moreover percentage change in latent heat of fusion (ΔH) was calculated from the DSC thermogram of both treated and control polymers. A significant increase in percentage ΔH of both treated cellulose (59.09%) and cellulose acetate (105.79%) polymers indicated that biofield treatment enhanced the thermal stability of the treated polymers. CHNSO analysis revealed a significant change in percentage hydrogen and oxygen of treated cellulose (%H-17.77, %O-16.89) and cellulose acetate (%H-5.67, %O-13.41). Though minimal change was observed in carbon percentage of both treated cellulose (0.29%) and cellulose acetate (0.39%) polymers as compared to their respective control samples. Thermo gravimetric analysis and Differential thermo gravimetric (TGA-DTG) analysis of treated cellulose acetate (353ºC) showed increased maximum thermal decomposition temperature as compared to control polymer (351ºC). This showed the higher thermal stability of the treated cellulose acetate polymer; although the maximum thermal decomposition temperature of treated cellulose (248ºC) was decreased as compared to control cellulose (321ºC). These outcomes confirmed that biofield treatment has changed the physicochemical properties of the cellulose polymers.

Characterization of Physical, Thermal and Spectral Properties of Biofield Treated 2-Aminopyridine

Journal: Science Journal of Analytical Chemistry PDF

Published: 21-Dec-15 Volume: 3 Issue: 6

DOI:10.11648/j.sjac.20150306.18 ISSN: 2376-8045 (Print) 2376-8053 (Online)

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak, Rakesh Kumar Mishra, Snehasis Jana

Abstract

2-Aminopyridine is an important compound, which is used as intermediate for the synthesis of pharmaceutical compounds. The present work was aimed to assess the effect of Mr. Trivedi’s biofield energy treatment on the physical, thermal and spectral characteristics of 2-AP. The work was accomplished by dividing the sample in two parts i.e. one part was remained untreated, and another part had received biofield energy treatment. Subsequently, the samples were analyzed using various characterization techniques such as X-ray diffraction, differential scanning calorimetry, thermogravimetric analysis, ultra violet-visible spectroscopy, and Fourier transform infrared spectroscopy. The XRD analysis revealed a decrease in crystallite size of the treated sample (91.80 nm) as compared to the control sample (97.99 nm). Additionally, the result showed an increase in Bragg’s angle (2θ) of the treated sample as compared to the control. The DSC and Differential thermal analysis analysis showed an increase in melting temperature of the treated 2-AP with respect to the control. Moreover, the latent heat of fusion of the treated sample was increased by 3.08%. The TGA analysis showed an increase in onset of thermal degradation (Tonset), and maximum thermal decomposition temperature (Tmax) of the treated 2-AP as compared to the control sample. Additionally, the treated sample showed a reduction in weight loss as compared with the control indicating higher thermal stability of the sample. UV-visible analysis showed no changes in the absorption peak of the treated sample as compared to the control. The FT-IR spectroscopic results showed downward shifting of C-H stretching vibration 2991→2955 cm-1 in treated sample with respect to the control.

The Potential Impact of Biofield Energy Treatment on the Atomic and Physical Properties of Antimony Tin Oxide Nanopowder

Journal: American Journal of Optics and Photonics PDF

Published: 21-Dec-15 Volume: 3 Issue: 6

DOI:10.11648/j.ajop.20150306.11 ISSN: 2330-8494 (Print) 2330-8494 (Online)

Authors: Mahendra Kumar Trivedi, Rama Mohan Tallapragada, Alice Branton, Dahryn Trivedi, Gopal Nayak, Omprakash Latiyal, Snehasis Jana

Abstract

Antimony tin oxide (ATO) is known for its high thermal conductivity, optical transmittance, and wide energy band gap, which makes it a promising material for the display devices, solar cells, and chemical sensor industries. The present study was undertaken to evaluate the effect of biofield energy treatment on the atomic and physical properties of ATO nanopowder. The ATO nanopowder was divided into two parts: control and treated. The treated part was subjected to Mr. Trivedi’s biofield energy treatment. The control and treated samples were analyzed using X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and electron spin resonance (ESR) spectroscopy. The XRD data revealed that the crystallite size on the plane (110) was significantly reduced to 53.1 nm as compared to the control (212.6 nm). In addition, the lattice parameter, unit cell volume, density, and molecular weight were also altered as compared to the control. The FT-IR spectra showed that the stretching vibration corresponding to Sn-OH was shifted to higher wavenumber (512 cm-1) in the treated sample as compared to the control (496 cm-1). Besides, ESR spectral analysis exhibited that the g-factor was reduced in the treated ATO sample by 21.1% as compared to the control. Also, the ESR signal width and height were reduced by 70.4% and 93.7%, respectively as compared to the control. Hence, the XRD, FT-IR, and ESR data revealed that the biofield energy treatment has a significant impact on the atomic and physical properties of ATO nanopowder. Therefore, the biofield energy treatment could be more useful in display devices and solar cell industries.

Quantitative Determination of Isotopic Abundance Ratio of 13C, 2H, and 18O in Biofield Energy Treated Ortho and Meta Toluic Acid Isomers

Journal: American Journal of Applied Chemistry PDF

Published: 21-Dec-15 Volume: 3 Issue: 6

DOI:10.11648/j.ajac.20150306.17 ISSN: 2330-8753 (Print) 2330-8745 (Online)

Authors: Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak, Gunin Saikia, Snehasis Jana

Abstract

O-Toluic acid (OTA) and m-toluic acid (MTA) are two isomers of toluic acid that act as an important organic intermediates, mostly used in medicines and pesticides. The aim of the study was to evaluate the impact of biofield energy treatment on isotopic abundance ratios of 2H/1H, 13C/12C, (PM+1)/PM and 18O/16O, (PM+2)/PM, in toluic acid isomers using gas chromatography-mass spectrometry (GC-MS). The OTA and MTA samples were divided into two parts: control and treated. The control sample remained as untreated, while the treated sample was further divided into four groups as T1, T2, T3, and T4. The treated group was subjected to biofield energy treatment. The GC-MS spectra of both the isomers showed five m/z peaks due to the molecular ion peak and fragmented peaks of toluic acid derivatives. The isotopic abundance ratio of (PM+1)/PM and (PM+2)/PM were calculated for both the isomers and found significant alteration in the treated isomers. The isotopic abundance ratio of (PM+1)/PM in treated samples of OTA was decreased and then slightly increased upto 2.37% in T2, where the (PM+2)/PM in treated OTA, significantly decreased by 55.3% in T3 sample. Similarly, in case of MTA, the isotopic abundance ratio of (PM+1)/PM in the treated sample showed a slight increase the (PM+2)/PM was decreased by 11.95% in T2 as compared to their respective control. GC-MS data suggests that the biofield energy treatment on toluic acid isomers had significantly altered the isotopic abundance of 2H, 13C, and 18O in OTA and MTA as compared to the control.